How To Repair Faux Leather Couch

Download Article

Download Article

Faux leather is cheaper than existent leather, and oftentimes easier to clean. Unfortunately, it is prone to peeling and swell after long periods of time. If y'all don't treat the damage right away, it tin can spread. Luckily, it is possible to set this, although the results won't be perfect. If your sofa got a tear in it, then fear not; there is a gear up for that besides!

1. one

   Peel and sand away any loose sections of faux leather. Faux leather tends to pare, sort of similar paint. If that happens, peel away most of the loose "leather" on meridian of the fabric backing. Next, use a fine-grit sanding sponge to polish down any crude edges and bubbles.^[1]

   • Don't get too carried abroad here! You only need to peel away the blanket that'southward inside the damaged area.

2. 2

   Apply a glaze of interior latex firm pigment, and so let the pigment dry. For the smoothest finish, pour the paint into a tray, then utilise it with a mini foam paint roller. Look for the pigment to dry out completely before moving on. This could have a few hours, depending on the type of pigment that y'all are using.^[2]

   • Bring one of the sofa cushions to the store then that they can color-friction match the paint for you.
   • You can employ "textile and vinyl" spray paint every bit well. Apply 1 glaze of gesso commencement, let information technology dry for one 24-hour interval, then apply the spray paint.

   Advertizing

3. iii

   Lightly sand the paint, then wipe away any dust. Get a piece of fine-grit sandpaper or a fine-grit sanding sponge. Utilize it to lightly sand the paint until the surface feels smooth, then wipe the grit away with a soft cloth.^[3]

   • This step volition reveal some of the bankroll material under the pigment. This is fine, and all office of achieving a smooth stop.

4. four

   Repeat the painting and sanding procedure up to 4 more times. Each time you apply a glaze of latex pigment, you fill in the grain on the exposed bankroll. When you sand the pigment, you smooth downward whatsoever raised bumps. How many times you lot end up doing this really depends on how bad the damage is.^[4]

   • Go along painting, drying, and sanding the surface until it looks shine.

5. v

   Buff the painted surface with a paste wax until it feels shine. This is important equally it acts as a sealant for the paint and prevents it from getting sticky. Simply rub the paste wax on, then wipe it off with a soft cloth. Keep buffing the surface until it feels smooth and the wax is absorbed into it.^[v]

   • Paste wax can take upwardly to xx minutes to dry. Fortunately, you lot tin can do a few things to help it dry faster, as described in the next step.

6. half dozen

   Dust babe powder or talcum pulverisation over the wax. This is not absolutely necessary, but it will assistance the wax set and dry faster. Use a pulverization brush to utilise the pulverization, wait a few minutes for the powder to absorb into the wax, and then dust the rest off.^[six]

Advertizement

1. 1

   Purchase a vinyl upholstery repair kit. Sometimes, these kits may be labeled for "leather and vinyl," which is fine. An upholstery or fabric store may carry them, but your best bet would be to expect online.

   • These kits usually come with basic colors, such as black, white, ruddy, yellow, and blue.
   • The kit described in this method requires heat setting.

2. two

   Mix the paint colors until yous match the color on your sofa. Some kits include a color mixing chart, which you can use as a reference. You may yet have to lighten or darken the color to get the exact shade you demand.^[7]

   • Most kits usually include a few empty pots for mixing and storing new colors. You can utilize these pots, or y'all can use a little dish instead.

3. 3

   Brush the paint onto the affected surface area, overlapping the edges. Use the brush included with the kit to apply the paint over the exposed surface. Be sure to extend the paint by a few millimeters onto the edge of the faux leather equally well; this will assistance seal it in better.

   • If your kit did not come with a brush, use a potent bristled brush; don't use a soft, camelhair brush.
   • This paint is heat-set, so it won't dry out until you lot use heat to it.

4. iv

   Utilise the included texture relief paper to the pigment, if desired. Most kits will include some sort of textured paper that mimic the texture of leather and pleather. If you want to make the repair more than seamless, you can apply this paper.^[8]

   • Skip this step if your kit did non include this newspaper.

5. 5

   Press the included heat tool against an atomic number 26 until information technology turns hot. Well-nigh heat tools will expect like a stick with a metal disk at one cease. The easiest way to heat this tool is to press the metal disk against a hot iron.^[9]

   • If you don't take an fe, you can heat the tool up confronting a lit burner on your stove, or even a candle flame.
   • If you lost the heat tool, you lot tin endeavour using a regular clothing iron on instead. Use a cotton, no-steam setting.

6. 6

   Press the estrus tool against the newspaper for two minutes. Move the tool around so that you distribute the rut evenly, and so peel the paper away. If the texture is non upwards to your liking, apply the paper and heat tool once again.^[10]

   • Keep the tool hot. Re-heat it a few times confronting the atomic number 26, peculiarly if you can experience it cooling town.
   • If you lot are using a regular fe, printing the paper with just the tip; avoid touching the balance of the sofa. If this softens the simulated leather too much, lower the heat.

7. seven

   Echo the process if needed. Peel the paper abroad and take a look at your piece of work. If the damage is still showing through, give information technology another layer of paint, and so reapply the newspaper and oestrus tool.

   • If the texture is non enough for y'all, so just replace the paper, and "fe" it with your estrus tool once more.

Advertising

1. 1

   Cut a denim patch a little larger than the tear. Depending on the shape of the tear, your patch may be square or rectangular; it just needs to be big plenty to cover the unabridged tear, plus about ⁱ⁄_four to ^one⁄₂ inch (0.64 to 1.27 cm) extra to each side.^[11]

   • Be certain to round the corners of the rectangle or square to help forbid buckling.
   • This will go backside the tear and "leather," so the colour of the material does not matter.
   • You can use an actual denim repair patch, or you tin cut a patch from an old pair of jeans. If you don't take whatsoever denim on manus, another sturdy textile, like sheet, may work.

2. 2

   Employ tweezers to insert the patch into the tear. Avoid using your fingers for this, as they can cause the faux leather to warp. Simply use the tweezers to push and slide the denim unto the tear.^[12]

   • Run your fingers across the faux leather to either side of the tear. If you feel whatsoever bumps, smoothen them out with the tweezers from the inside.
   • Don't remove the sofa comprehend. Insert the patch through the slit into the sofa, then smoothen it out.

3. 3

   Utilize a flexible glue to the dorsum of the simulated leather with a toothpick. Coat a toothpick with a strong, flexible glue, and so slide it into 1 side of the tear. Move the toothpick around so that it coats the back of the simulated leather, then repeat the procedure for the other side of the tear.^[13]

   • A flexible super glue made for fabric and vinyl will work fine for this; practice not use regular super glue, however, every bit it dries too hard. Y'all tin can also employ material glue.

4. iv

   Wipe off the backlog glue, if needed, then press the tear together. Employ a newspaper towel or a soft cloth to wipe off any excess glue that may have leaked out from the tear. Next, using your fingers, press the edges of the tear together so that they are affluent.^[14]

   • Work quickly so that the glue does not dry. You want to get everything into position before the glue sets.
   • Depending on the brand of gum that you lot are using, yous'll take about 10 to 15 minutes to work with.

5. 5

   Press downwardly on the tear with a lath until the glue dries. You can also use another hard, apartment object such as a hardcover book or a tray. Brand sure that information technology is rigid so that it doesn't flex when you press down on it. Center the board over the tear, then lean against it.^[xv]

   • Check the directions on the bottle to discover out how long the mucilage needs to dry. Most glues are touch-dry within ten to xv minutes, which is all y'all need.

6. half-dozen

   Texturize the tear with super glue and a paper towel. For this step, you actually practise desire to employ regular super glue. Simply make full the crack with a little bit of super glue, then pat it with a scrunched up paper towel. The paper towel will help elevator the backlog glue likewise equally add some texture.^[16]

   • This pace is not admittedly necessary. It is purely for artful reasons.

7. seven

   Coat the damage with vinyl paint, if desired. Information technology would be best if you used a specialized paint made for repairing vinyl, merely if y'all tin't find any, then interior latex pigment or acrylic pigment will practise. Utilize the paint over the tear with a sponge castor, so dry out information technology with a hair dryer.^[17]

   • Again, this pace is for artful purposes. If you only want to patch upwards the tear, then you don't need to do this.
   • If yous texturized the tear with super glue, then you should utilise the paint to assist blend information technology in.
   • Take one of the sofa pillows to the shop with you and so that you can match the color of the paint to it.

8. viii

   Blend the tear in further with sanding and more mucilage, if needed. Take a wait at your repair. The tear looks seamless, then you are good to go. If you see some bumps and ridges, sand the surface downwards with 220- to 325-grit sandpaper, so apply more super glue. Pat the glue with a newspaper towel, apply more pigment, then oestrus-set the paint with a hairdryer.^[xviii]

   • Be careful with bonded leather, which is but a thin layer of paint on a fabric-like backing. If you sand exterior the painted area, you risk damaging the surface.

Advertisement

Ask a Question

200 characters left

Include your electronic mail accost to get a message when this question is answered.

Submit

Advert

• Make certain that any paint or glue has stale and cured completely before you use the sofa. These times may vary depending on the production that you are using, so read the instructions!

• Some paints appear a 1 or ii shades lighter while they are wet. If y'all are working with acrylic paint, you may want to make it lighter.

Thanks for submitting a tip for review!

Advert

Things You'll Demand

• Mini foam roller
• Interior latex paint
• Paste wax
• Baby power or talcum power
• Soft brush or powder brush
• Soft cloths

• Vinyl repair kit for upholstery
• Iron

• Denim
• Tweezers
• Flexible glue (i.eastward. fabric mucilage)
• Super mucilage (optional)
• Toothpick (optional)
• 220- to 325-grit sandpaper (optional)
• Sponge brush (optional)
• Vinyl, latex, or acrylic paint (optional)
• Hairdryer (optional)

Well-nigh This Article

Commodity Summary X

If your fake leather sofa is peeling, you can fix the damaged areas with interior latex paint. To become the right shade of paint, take 1 of your sofa cushions to the paint store and enquire them to color-match it. Before you start painting, prep the area by peeling away whatsoever loose textile and sanding away rough edges with a fine-grit sponge. Once the area is shine, apply a coat of interior latex pigment with a mini foam pigment roller and let it dry. When the first coat is completely dry, lightly sand information technology until information technology's shine and wipe upwardly whatever dust. Then, echo the painting and sanding process upwardly to 4 more times. To seal your pigment task, buff the surface with a paste wax until it's smooth. For more assist, like how to repair rips and tears, read on!

Did this summary help y'all?

Thanks to all authors for creating a page that has been read 119,499 times.

Did this article help you?

Source: https://www.wikihow.com/Repair-a-Faux-Leather-Sofa

Share this post